Shears-how to use Shears-how to use Shears

Shears-how to use Shears?

Shears on safe handling are as follows:
1, there must be someone responsible for the management of shears.
2. Dress code, wear tight-fitting protective clothing before the operation, cuff buckle, shirt hem is not open, not in the starting of the machine next to wear off clothes, or cloth around the body, to prevent the machine twisting injury. Helmets must be worn, braids shall be placed within the cap, not wearing a skirt, slippers.
3. The shearing machine operator must be familiar with the main structure, properties and uses.
4. This machine is suitable for cutting materials of various thickness of the machine rating plate, copper, aluminum and non-metallic sheet material, and must be no hard-marks, welding slag, slag, weld material, does not allow super thickness.
5. Shears bed use:
a. According to the thickness of the material being cut, adjust the blade clearance.
b. According to the material being cut by mold or clamp width adjustment.
C. Machine operator for 1,3 times before air travel, only after the implementation of the shear to normal work.
6. Use is found does not operate, immediately turn off the power down to check.
7. Adjust the machine must be cut off the power, move the workpiece, you should pay attention to the safety of hand.
8 ministries shears should be kept lubricated by the operator class filling oil once every six months by the mechanics of a rolling bearing parts of the filling oil.
9, the operation when the shears, hand and foot movements to be coordinated, non-wearing gloves, reach into the plate and is strictly prohibited incision.
10, hand over command of collaboration must be specified. Prohibited in the same bed at the same time cut cut two materials.
11, on-site cleaning, work site prohibit huddle parts and debris, so keep the venue clean bed and shears.
12, the work is completed, cut off power and lock power supply box.