How to use Reaper

Reaper-How to use Reaper?

Reaper machines in use before the instructions should be required to conduct a comprehensive inspection, including:

(1) food inspection seal does not leak. Taiwan and the inclination of the cutting and threshing part of the burglary to feed the tape at the bar, the lower grain pushing device, re-off device, pushing the bottom and the elevator control device of the manhole covers activities such as joints, must be leakproof seal food inspection and testing.

 (2) Check the Reaper machine threshing gap. First, check the blade is intact, blade selection is solid, the blade gap, the gap is suitable compression edge device, then check the size and threshing gap uniformity to meet the requirements.

(3) Check the Reaper machine transmission parts. Check for bent main shaft, bearing clearance, shaft and bearing fixed, the rotation of the shaft. Then open to the engine rated speed, check the threshing drum speed (900-1000 rev / min), fan speed (700-800 rev / min), does not meet the speed requirements of the harvester to adjust.

(4) Check the Reaper machine accessories. Clutch of standard technical condition should not slip up after bonding power, transmission power, reliable, complete separation of power, shift light, no fight tooth phenomenon. Check the high speed of the sprocket, belt wheel, bearing on the top wire of solid situation. Also check the relative position of each component is correct. In particular, check the chain tension and tape should be consistent with the model.